How to get the best out of the history command in GNU/Linux

Short URL:


Anybody who has used the command line extensively to navigate, understand and configure GNU/Linux will know that in the course of a few months’ work it is possible to build up an extensive history of used commands. This necessitates some pro-active management to get the best out of it. Here are some tips to make the most of the history command.

Please note, from the outset, that command history is only saved in interactive shells and does not, therefore, work with shell scripts.

By default, the shell Bash is designed to retain the last five hundred commands you entered. If you want to see them, just open ~/.bash_history and scroll through it. Or, by simply typing history on a command line the terminal will list them.

If you know there will be a lot of output, then it makes sense to pipe it to less: history | less; with less, you can see the command history one screen at a time (by pressing the spacebar) or one line at a time (by pressing the down arrow).

If you’d rather not even be bothered with piping with less, just specify the number of commands you want (if you are pretty sure it was a quite recent one): history 25 or history | tail to output the last ten commands.

Helpfully, if you want to rerun a command and can’t quite remember its format, the history facility allows you to simply step through them one at a time by pressing the up arrow (or Ctrl + P) continuously from your command prompt until you find the one you are looking for; you can also use the down arrow (or Ctrl + N) to go to the “next" command. When you find the command you want to run, hit the return key to run it.

If you think you know the command but can’t quite recall the command exactly, then you can pipe it with grep and the first few letters of that command: history | grep -i. The i should be followed by the first letter(s) of the command you are attempting to find. Again, use less to step through them and or combine it with the down arrow: history | grep -i | less.

Another useful feature related to history is to use Ctrl + R. This will output a prompt called a reverse-interactive-search. All you then need to do is to start typing the command and it will complete the command with the most recent matching command from the history file. If there is more than one relevant command in the history file and the one you need is not the most recent, then just type a few more letters to distinguish the command. Once you see the one you want press the return key to run it or press the right arrow key to edit it.

Stop repeating yourself

Statistically, it is very likely that you have used the same command more than once, however small or large. If it is a long list why not simply skip the duplicate entries and speed thing up a bit? Add the following to either your personal bash file (~/.bashrc) or to the global bash configuration file (/etc/bash.bashrc:

export HISTCONTROL=ignoreboth

This change, made in your favourite text editor must of course be done as root. For it to take effect you must restart the bash shell: you can simply log out and log in again. If you now type env you should see that configuration listed: bash will, from now on, skip the duplicate entries.

Cut history down to size

If you are not a big user of the command line and want to make history slimmer, then specify it permanently in one of the two bash files listed above. It takes the form of export HISTSIZE=X where “X" is replaced with the number of commands you want to keep in your history (setting X to 100 will store 100 commands). If the value is set to zero, history is disabled. Keep in mind that you will need to restart the shell in order for the changes to take effect.

These changes may help to make you more secure. As an added measure it is possible to set up Bash to clear history upon exit by adding the following configuration in your ~/.bash_logout file: /usr/bin/clear_console. In some GNU/Linux distros this setting may already be the default. More radically, if you want to delete history altogether just type history -c but be aware that there is no way to retrieve that history once it is gone.

Security is a huge subject for computers and rightly fills many books. Apart from the obvious things such as setting up a root password, running virus and rootkit scanners, keeping security patches up to date and IDSes like Snort, a quick hack (amongst many) is to check the output of the history command. If you know that you did not disable the history, and yet it’s empty and, therefore, ~/.bash_history is empty, then it may be that you have been hacked and that the Bash history has been wiped out. Run this command: ls -l ~/.bash_history and the result (unhacked) should look like this (mine):

-rw------- 1 richmondg users 7228 2007-07-23 23:22 /home/richmondg/.bash_history

If your history is unexpectedly empty, you will know that your computer has probably been compromised and you should probably reinstall it.


Well, there you have it. The history command is powerful and versatile. Like alias, it can save keystrokes, aid security and save time. It helps you to work smarter and reveals yet again the true power of the command line. So what are you waiting for? Fire up that terminal!



Felipe Alvarez's picture

If you know that you've done a secure shell (ssh) recently, but just can't remember the exact host name or IP address. Try this tip.

Type: ssh
And then press PgUp key. It will cycle through *only* the commands that begin with 'ssh' and ignore all the rest!

You can use this for 'cp' or 'mv' or 'ls' or anything you can think of! Enjoy.

(I promise I won't write the word 'stupid' again -- oops! i just blew it, didn't i?)

Anonymous visitor's picture
Submitted by Anonymous visitor (not verified) on

There's no need to be root to add a line to your own .bashrc file.

leeyee's picture
Submitted by leeyee on

Hi, I sorted command history with following function defined in .bashrc
history_sorted ()
history | awk '{ if ($2 == "sudo") $2=$3; print $2 }' | sort | uniq -c | sort -nr

Lawrence D'Oliveiro's picture
Submitted by Lawrence D'Oliveiro (not verified) on

Here's another fun one: hit CTRL/R to bring up the "reverse i-search" prompt. Soon as you type a character, it will search backwards through the history to find the last occurrence of that character. Type a second character, and now you're looking at the last occurrence of that two-character string. Keep typing until you find the command you want (or you'll hear beeps if the string can't be found). Press Enter to invoke the displayed command, or hit CTRL/G to abandon the search.

You can similarly use CTRL/S to search forwards through the history.

Ryan Cartwright's picture

If you want to repeat the last occurrence of a command, including arguments then try using the !. It will find the most recent occurrence of the command and run it.

WARNING: this will execute the command immediately so be careful!


foobar:~$ !gre

gives this result

grep -c ryan *

The first line of the result is the command it actually found and ran. Note how I didn't have to specify the entire command (grep).

Slightly related is !$ which will repeat the final argument of the previous command. It's very handy if you want to double check you are about the remove the correct files.

foobar:~$ ls -l backup*
-rw-r--r-- 1 ryan ryan 1629 2005-06-13 23:36
-rw-r--r-- 1 ryan ryan 189 2007-04-12 18:15 backup_excludes
-rwx------ 1 ryan ryan 268 2006-09-21 18:28
foobar: ~$

whoops too many files in there so

foobar:~$ ls -l backup-*
-rw-r--r-- 1 ryan ryan 1629 2005-06-13 23:36
foobar:~$ rm !$
rm backup*

Again see how it shows you the command it ran before running it.


Felipe Alvarez's picture

The above poster made a mistake
Instead of:
foobar:~$ rm !$
rm backup*

It should have been:
foobar:~$ rm !$
rm backup-*

maravind's picture
Submitted by maravind on

And way to get there with a silly command:

lycaon:~$ source ~/.bash_history

instead of doing the obvious

lycaon:~$ source ~/.bash_profile

Ooohh... still gets creeps at the thought of pressing return for the first one...

No worries,

Mahesh Aravind

Author information

Gary Richmond's picture


A retired but passionate user of free and open source for nearly ten years, novice Python programmer, Ubuntu user, musical wanabee when "playing" piano and guitar. When not torturing musical instruments, rumoured to be translating Vogon poetry into Swahili.