Edubuntu, Linux Terminal Server and thin clients

Short URL:


You walk into the room. It’s cool and quiet. You see thirty new workstations giving great service. Your cost of hardware was CAD$350 for each workstation, CAD$10 to connect it to an existing 100Mbps LAN, and about CAD$60 for a share of a server in another room (CAD$1 = US$0.87). Your software costs were only some download and CD burn time and forty minutes for installation. Your operating costs are virtually nil. The server runs for months without a reboot. The workstations have nothing but network boot loaders. You back up only one machine, the server. The workstations use twenty watts each and have no fans. Magical? Yes. Magic? No. Arthur C. Clarke once made the comment that “technology sufficiently advanced is indistinguishable from magic". A stock server or a custom-built server made from off-the-shelf parts has taken the place of the mainframe in a client/server arrangement. Moore's Law makes the hardware cheap. GNU/Linux makes it free to use to its potential. This is old but capable technology made easy to install thanks to the GNU/Linux revolution.

This is old but capable technology made easy to install thanks to the GNU/Linux revolution

Cost per clientCost per client

What you have are workstations of fanless, diskless clients connected to LCD monitors, mice and keyboards. The low-powered clients do little except relay inputs and graphics between the user and the server via the X Window System. The server is a reasonably powerful PC with extra memory and storage. You get away with having thirty users at once running on the server because recent CPUs have the power and the typical user typing and clicking uses up only a small percentage of such a CPU and uses the power in short bursts. By investing a little more on the server, everyone gets to share in the benefit and it is never wasted. The first time a user loads a program the server caches it in memory for any subsequent users. This is a much better system than paying per-user licence fees, installing and maintaining software on hard drives on each client and keeping all the disks and fans turning. You do not need to chase dust bunnies on these fanless units. You save hundreds of dollars in electrical energy over the lengthy lifetime of this equipment and you do not need to listen to all those pointless whirring sounds.

CPU utilization versus time with nine usersCPU utilization versus time with nine users

How can you get this all to work without resorting to magic or hiring a magician? LTSP, the Linux Terminal Server Project is a free software project intended to make the setup easy. The clients configure via DHCP (Dynamic Host Configuration Protocol) and download a minimal GNU/Linux operating system from the server using TFTP (Tiny File Transfer Protocol). The GNU/Linux operating system for the client boots and uses a file system on the server and the memory of the client to do everything. The initial network boot can be done by a ROM (Read Only Memory) resident program on the client. Most PCs since 1998 have this capability built into the BIOS if there is a Network Interface Controller (NIC) built into the motherboard. The BIOS setup may mention PXE, Pre-Execution Environment or network in the booting section. Others can incorporate a boot loader in a socket on the NIC into the BIOS of the PC, or boot from a floppy, USB device, hard drive or CD.

The folks who made Edubuntu put in automatic installation of the simplest, and most common setup

The only software installation required is on the server. You can use a GNU/Linux distribution designed for use in schools and by teachers with modest expertise. Because the LTSP scripts can be a hassle for a novice, the folks who made Edubuntu (Ubuntu plus a few packages and configurations for schools) put in automatic installation of the simplest, and most common setup, the server running a private LAN with your clients. This works well for a classroom, a computer lab, an office or a small school. Except for multimedia intensive stations the LTSP concept works for about thirty clients from a single 32 bit CPU with 2GB RAM. Using a dual-core 64 bit CPU and 4GB RAM, one server can handle sixty clients. With multiple servers or multiple socket motherboards the system will scale to well over one hundred clients. You only have to eliminate bottlenecks on the LAN by using a gigabit per second connection between server and switch. 100Mbps works well from switch to client. 10Mbps works, too, but there are noticeable delays.

What an LTSP Server wants

The specs for an LTSP server are pretty simple:

  • 512MB RAM for the idling system with all of its services
  • 50MB per client to hold user data and the first copy of common applications
  • 100MHz of 32 bit processing power or about 75MHz of 64 bit power per client. AMD or Intel work, but AMD gives more computing power per watt and has an on-chip memory controller in 64 bit. The competition between these two makes price/performance good for our use. It is important to select components that match motherboard/CPU/memory/NICs if you build from parts.
  • A gigabit NIC for the private LAN (100 megabit is OK for small LANs with patient users, random boots or client always on)
  • 10/100 baseT NIC for the ISP

The gigabit NIC is optional unless you want to save seconds on the boot over the network when everyone shows up to work in the same minute and transfers 4 MB of kernel. Many motherboards come with a gigabit NIC and they are cheap. The following examples don’t include a monitor, keyboard, mouse, CDROM drive or video card which are only needed for installation. The BIOS can be set up to boot on restoration of power and to ignore lack of a keyboard. The X configuration can be set to use a dummy driver when the video card is absent. The server can be maintained remotely by SSH (Secure SHell) or LTSP. A backup hard drive with USB connection is also recommended.

An example of a server good for up to sixty clients:

  • AMD Opteron 170 dual core 2 MB cache CAD$519
  • 4GB ECC DDR333 RAM CAD$500
  • ASUS A8N-E motherboard CAD$125
  • ATX case and power supply w/400-500W capacity CAD$200+
  • 10/100 baseT NIC CAD$15
  • dual 200GB hard drives SATA CAD$210
  • Total CAD$1570

A good server for up to thirty clients could use the same setup but with an AMD64 3200 processor and 2GB non-ECC RAM, costing about CAD$1000.

For up to 10 clients, and modest services, use a recent desktop PC with 1GB of RAM and an extra NIC.

For 120 clients, use a dual socket Opteron motherboard with suitable processors and 6GB ECC registered RAM costing about CAD$4300 or more:

  • AMD Opteron 275 dual core 2MB cache 2 X CAD$1353 = CAD$2706
  • ASUS K8N-DL motherboard CAD$287
  • ATX case and 500W power supply CAD$250
  • 10/100 baseT NIC CAD$15
  • dual 200GB hard drives SATA CAD$210
  • 6GB DDR400 ECC registered RAM 6 X CAD$150 = CAD$900
  • Total CAD$4368

Another alternative is dual 60 client servers giving more flexibility, speed, and some redundancy for lower cost but more maintenance. This would require networking of the file system, which is a little more complex than an Edubuntu installation. The dual core processors need an SMP (Symmetric Multi Processor) kernel installed. If you install with that CPU it may be automatically configured. If you add a dual core processor, you’ll need to install the right kernel manually. The command sudo apt-get install linux-amd64-k8-smp will install the latest kernel for AMD64 on a VIA K8 chipset for multiple processors. Of course, if you have a different architecture, you can look it up on the Ubuntu web site.

What an LTSP client wants

If you can keep the fans turning, almost any PC will do. PCs with fans use more power than is necessary and act as vacuum cleaners, accumulating dust bunnies that jam fans, and interfere with flow of air over chips and heat sinks. 64MB and 100MHz is enough. Configure the BIOS to boot from the network. Most PCs made before 1998 will not automatically do a network boot, so you will need to install a bootloader on the hard drive, floppy or CD. You can use a Universal Boot Disc from ThinStation which comes with drivers for most common NICs or you can custom make a bootloader from Rom-O-Matic. Pick your NIC and choose your output format, .zdsk for a bootable floppy image or .liso for a bootable CD image. There are more advanced options available. You can create the floppy discs on your server with the command: sudo dd if=image_file of=/dev/fd0. With a cdburner, you may use the cdrecord command from the commandline (terminal) or a graphical interface like nautilus-cd-burner which can be accessed from the “Go" menu item of the file browser. Click on “CD creator". You drag and drop or copy and paste the file icon for the CD image file to the window.

If there are not enough old machines to use as clients, or the space saving convenience of LCD monitors and ultra-low-power clients is desired, one can shop in a very competitive market. Chip maker VIA Technologies, Inc. makes a family of CPUs that serve very well as thin clients and use so little power they don’t need fans. If you are adventurous, you may purchase a mini-motherboard with an Epia CPU installed. The low powered versions need no fans and the motherboard is 17cm X 17cm and can fit into a tiny case that bolts to the back of an LCD monitor. Such motherboards are available for about CAD$110 CAD. A power supply that converts 12V DC or 110V AC to ATX costs about CAD$50 for the fanless kind. You can put this in a cheap case for less than CAD$50 and add CAD$30 of RAM and you get a client costing CAD$240 plus a monitor, keyboard, mouse and fifteen minutes of your time. This will save you about CAD$150 from the price of a complete thin client. Still, an old used machine may be bought for less than CAD$100.

Installing Edubuntu on the server

To install Edubuntu, obtain a CD by download. Burn the file appropriate to your hardware to a 700MB CD.

Edubuntu installs all of the software with only a few questions relating to LTSP:

  • Primary network interface: eth0 or eth1? Usually eth1 will be on the motherboard and eth0 in the expansion slots.
  • What is the IP address? Use something in 192.168.0.x and you get good defaults with no editing required. Typically, choose or, to leave lots of space for printers, clients and so on
  • What is the netmask? Use
  • What is the gateway? Leave blank or use IP address of gateway to the WWW
  • Name server address? I usually install my own name server, but a novice should use the one for WWW connections or leave this blank

To set up the other NIC for WWW access, do so from the GUI once you log in. Since the clients run on the server, they will have internet access. One complication for this is that the DHCP (Dynamic Host Configuration Protocol) server, which you are setting up to serve your private LAN, needs to be told to ignore DHCP requests on the eth1 interface. The default behaviour is to listen on all interfaces. To change this, edit as root /etc/default/dhcp using the command: sudo gedit /etc/default/dhcp. Add these lines:

# On what interfaces should the DHCP server (dhcpd) serve DHCP requests? 
# Separate multiple interfaces with spaces, e.g. "eth0 eth1"

You will then need to restart the DHCP server with the command: sudo /etc/init.d/dhcp restart.

Your private LAN will likely need several connections to eth0. Typically, this is done by connecting eth0 to a network switch. I recommend that eth0 be connected to a gigabit per second port, if your switch has one. That way, the server can send data for several clients to the switch and the switch gives the data to the clients at their rates. This is mostly important for booting or animation. If a group walks in and everyone boots, you may save many seconds by using this gigabit connection. For a NIC on the PCI bus, 1Gbps uses most of the capacity of the bus for short bursts, so avoid putting many other extensions on the PCI bus with your gigabit NIC. Many motherboards have a gigabit NIC (likely, eth1) built-in and connected to a bus other than the PCI bus. Check your manual to be sure. A big advantage of the 64 bit motherboards is that the NIC on the motherboard, the IDE and SATA drives may all do transfers at once. On most 32 bit boards, someone will have to wait because the PCI bus has a much smaller bandwidth.

Managed switches with two gigabit ports and 24 10/100 automatic ports such as ASUS GIGAX1024P are quite inexpensive. For a classroom, an eight port switch will do.

Typical LANTypical LAN

Bandwidth problems are unlikely if the gigabit connection is used. The typical cable subscriber can stream pretty well and this is hundreds of times the bandwidth from the server and ten times the bandwidth from the switch. With this arrangement many users all feel they have complete control of the server. It is magical the first time you see it. The plain X protocol used to connect the screen of the user to the server does some unnecessary chattering. So setups with lots of activity may benefit from compression and redundancy removal with the NX protocol. Free software for NX has become available and it’s still developing rapidly. The 64 bit version may be available in 2006.


Anyone can set up a Linux Terminal Server on a good machine in under an hour with Edubuntu and connect it to a private LAN with a bunch of clients. Given sufficient resources on the server, this is a very cost effective solution for a home, classroom, computer lab, and offices of small to medium size. A large organization will have to choose between a very expensive hot server or a cluster of lesser machines sharing the load. The latter is almost certainly less expensive to purchase, but may require somewhat more maintenance.

Images of the installation of Edubuntu default

These images were screenshot captures made during the installation simulated by the Bocks emulator.

Step 1: Press Enter at the boot screenStep 1: Press Enter at the boot screen
Step 2: Choose languageStep 2: Choose language
Step 3: Choose locationStep 3: Choose location
Step 4: Choose keyboard layoutStep 4: Choose keyboard layout
Step 5: Watch informational messagesStep 5: Watch informational messages
Step 6: Choose NICStep 6: Choose NIC
Step 7: Choose gateway (optional)Step 7: Choose gateway (optional)
Step 8: Choose IP address of your server on LANStep 8: Choose IP address of your server on LAN
Step 9: Choose nameserverStep 9: Choose nameserver
Step 10: Choose netmaskStep 10: Choose netmask
Step 11: Partitioning choicesStep 11: Partitioning choices
Step 12: Accept partitionStep 12: Accept partition
Step 13: Installing base systemStep 13: Installing base system
Step 14: Choose timezoneStep 14: Choose timezone
Step 15: Choose normal userStep 15: Choose normal user
Step 16: Choose user IDStep 16: Choose user ID
Step 17: Choose user passwordStep 17: Choose user password
Step 18: Verify user passwordStep 18: Verify user password
Step 19: Install GRUB (GRand Unified Bootloader)Step 19: Install GRUB (GRand Unified Bootloader)
Step 20: First stage done (reboot)Step 20: First stage done (reboot)
Step 21: Installing packagesStep 21: Installing packages
Step 22: Login (on server)Step 22: Login (on server)
Step 23: The Edubuntu desktopStep 23: The Edubuntu desktop
Step 24: MenusStep 24: Menus
Step 25: Login (on client)Step 25: Login (on client)

Further information



Anonymous visitor's picture
Submitted by Anonymous visitor (not verified) on


We are getting close to coming few circle. When the 386 came out we could run 512, yes five hundred and twelve, users on a single server.

BTW, it would be nice to have a one-shot printable version of the whole article.

Henry Keultjes
Database Scientifics Project
Mansfield Ohio USA

Anonymous visitor's picture
Submitted by Anonymous visitor (not verified) on

I was wondering how this would handle applications that were very graphics intensive? Applications that relied heavily on the performance of a graphics card.

Anonymous visitor's picture
Submitted by Anonymous visitor (not verified) on

You can run the graphics application on the terminal, but it takes some setup. Google for local applications or local apps on or ubuntu's site.

Anonymous visitor's picture
Submitted by Anonymous visitor (not verified) on

What is missing between steps 24 and 25? Where is the LTSP configuration stuff?

Anonymous visitor's picture
Submitted by Anonymous visitor (not verified) on

Those missing steps are keeping me from using this.

Anonymous visitor's picture
Submitted by Anonymous visitor (not verified) on

It is automatically done if you have two ethernet connections live, one to the internet and one to a switch to your thin clients. You need the internet side not to be 192.168.0.x as that is what is assumed for the LAN on which your thin clients reside. If you cannot have this arrangement, you need to see the LTSP documentation.

Anonymous visitor's picture
Submitted by Anonymous visitor (not verified) on

Great, except for when you want your employees/students/etc to be able to take their work away from the room. In this case you want a "thick client" via laptop, etc. Thin clients would be the answer to almost everything if it weren't for the mobility issue.

Anonymous visitor's picture
Submitted by Anonymous visitor (not verified) on

Actually, that's about to improve radically. Obviously if you have a central file server the student can go across the school, login and see their files.

However, more to the point, Edubuntu/LTSP are introducing support for using USB keys on thin clients in the upcoming October release. Details here.

Anonymous visitor's picture
Submitted by Anonymous visitor (not verified) on

In that case, you authenticate yourself to a file server via LDAP, the files are sent to you, and the files go back into the central server once the work is finished.

Anonymous visitor's picture
Submitted by Anonymous visitor (not verified) on

"Citrix". citrix allows users to connect to a location outside of the network using upto 128 bit encryption for the connection. citrix homepage:

the article was overall pretty descent, and is a major advancement for the linux and business world. I like the overall low cost of ownership, and i would love to show my boss, and work on this sort of project in our company.

Anonymous visitor's picture
Submitted by Anonymous visitor (not verified) on

TFTP is Trivial, not Tiny.

Anonymous visitor's picture
Submitted by Anonymous visitor (not verified) on

like this comment ;)

Anonymous visitor's picture
Submitted by Anonymous visitor (not verified) on

Not really, any disinformation is bad information.

Anonymous visitor's picture
Submitted by Anonymous visitor (not verified) on

Great article about LTSP and thin clients!

I know Symbio Technologies ( has sold lots of LTSP-based products into Canada, along with thin clients for much less than CA $350. Removable media, 16-bit stereo sound, and video all work quite nicely (due in no small part to the wonders of LTSP is great, and if you want something supported and canned, Symbio's a good place to look.

Terry Hancock's picture

These are getting really nice.

I saw a manufacturer site recently selling a unit that's about the size of a conventional half-height disk drive (who remember full-height anymore).

For something like US$120 each (they're cheaper in quantity), you get a tiny box with a 166MHz+ CPU, 128 MB RAM, a Compact Flash slot (to replace a hard drive), USB, keyboard, serial I/O slots, 2D/Multimedia accelerated graphics, and audio (I don't think it has 3D acceleration). Since they run Puppy Linux on it, it must have Linux drivers for the hardware. Also, it's supposed to run from about 0 to 60 C (32 to 140 F) with no fan and will bolt onto the back of a standard VESA LCD monitor.

(Note this partially answers the 'graphics intensive' question above -- multimedia applications are supported, but not really 3D).

In my experience, you can usually find used CRT monitors for US$40 to US$60, but they're a false economy, because they lose definition over time ("fuzz out", I call it) and become unusable in much less than the lifetime of an LCD monitor (provided you don't poke the LCD panel with something -- they really need lexan or glass covers for these things!). I just found a used 17" LCD for US$130 from an online shop, which is probably a better deal. $200 is not an uncommon new price if you go to the right suppliers.

So, yeah, the client is going to cost US$300â€"but US$200 of that is probably the LCD monitor! Monitors aren't very price-flexible, but fortunately, they last longer and obsolesce slower than most other computer equipment, so they tend to be good investments. I probably upgrade CPUs every 2-3 years, but I hardly ever get rid of monitors. Keyboards and mice may eventually be a problem, but they're in the US$10 range, so it'll be awhile before they start to impact the flexibility of client prices.

So the next step, if any, is to bring down the cost and increase the durability of LCD monitors. Of course, the One Laptop Per Child project (and therefore Quanta) is doing that. I wonder if we'll see spin-off LCD monitors based on the same LCD panel (or same technology).

The Open Graphics Project is also really close to manufacturing their first open hardware FPGA prototyping cards. In a year or so, they may be talking about doing the ASIC (consumer-targeted) cards, and selling the chipset to embedded developers, which might well mean inexpensive clients like this with basic 3D acceleration, so you could actually run CAD software (or Blender) over these kind of clients.

Anonymous visitor's picture
Submitted by Anonymous visitor (not verified) on

is there anyway I can get this tutorial as a .PDF? Thanks..

admin's picture
Submitted by admin on

This article comes from issue 13. If you become a subscriber (which is free) then you can download the issue in PDF format here by clicking on the download link.

Anonymous visitor's picture
Submitted by Anonymous visitor (not verified) on

The only "stressful" thing my workstations currently do is provide dual-head video - the main reason why the $250 thin-client has not been an option for me.
Now I see SUN has dual-head thin clients - - about $500, I think, plus 2 17'' LCDs.
Does anybody have experiences with such a setup?
- bunk

Anonymous visitor's picture
Submitted by Anonymous visitor (not verified) on


Yes, Sun Ray clients are a great way to go, and you can get them working off a linux server.

Go to to download the server software.

It is trivially easy to install on Solaris 10, RHEL, or CentOS 3.3. If you want to install on something other than that then there is a little bit of work involved.

Anonymous visitor's picture
Submitted by Anonymous visitor (not verified) on

Hello folks,

There is another turnkey LTSP distribution called K12LTSP, maintained by Eric Harrison (he also contributes to Edubuntu). K12LTSP came out in, I believe, 2001 and currently has two versions:

1.) Fedora Core-based
2.) CentOS-based

I happen to use the CentOS-based one at home, and I have a couple of schools using the Fedora-based ones. Here are some reasons why you might want to consider trying K12LTSP:

A.) It supports both EtherBoot *and* PXE-boot simultaneously. That means all those old Pentium-133's, too, can be used as thin clients, totally seamlessly, right alongside the new PXE-booting thin clients.

B.) It also supports not just x86 thin clients, but also Power Mac thin clients, *simultaneously*, on the same network segment (I and several others have verified this!).

C.) It's even easier to install a K12LTSP server than it is to install Windows XP, let alone something like Windows Server 2003. It's all integrated seamlessly into the Red Hat installation process. Good default settings were chosen, so yes, you can click through all the defaults, and boom, you're done.

Now, I'm not knocking Edubuntu; I use and demo it myself, and I'm sure glad it's here. However, K12LTSP has simply been around a few more years and therefore is more mature at this point (e. g. simultaneous EtherBoot and PXE and x86/PMac client support). Now, Edubuntu can easily be made to do these things, too; it's basically just a tweak to /etc/dhcpd.conf and copying over /opt/ltsp/ppc. I have tried this, and it does work.

With either distro (Edubuntu or K12LTSP), the cost savings are the same, and the benefits are the same. You'll do well with either, and above all, YOU WILL BE FREE OF THE BSA, MICROSOFT, AND APPLE. I know; we got hit with an audit, and it wasn't fun.

Anonymous visitor's picture
Submitted by Anonymous visitor (not verified) on

Remember that Intel recently open-sourced their integraded 3-D graphics drivers for use in That means that your graphics-intensive applications should now work just fine if you have an integrated Intel chipset. Finally, Intel's learning to play nice!

I recommend that everyone who's looking at buying new thin clients ask the manufacturer if they use an integrated Intel chipset. Another good option, for those who are using older PC's as thin clients, is the ATI Radeon 7500/8500 (yes, they're still very much around), and the Matrox Millennium G400/G450 (yes, they're around, too). Both video cards provide quite fast 2-D and 3-D video support.

STAY AWAY FROM NVIDIA *ANYTHING*, AS WELL AS ANY RECENT ATI CHIPSET (9200 and greater). You are limited to the S-L-O-W VESA driver with these chipsets. The reason is that both ATI and nVidious decided to no longer play nice with the Free/Open Source community and refuse to allow us to write drivers for their chips. We'll see how long that lasts now that Intel has seen the light; Intel's too big for them to ignore.

Anonymous visitor's picture
Submitted by Anonymous visitor (not verified) on

could you tell me where to find the info to do the tweak to add ppc on ltsp?

Anonymous visitor's picture
Submitted by Anonymous visitor (not verified) on

Mandrake (now Mandriva) had this a long time ago. I have not used their system lately.

Debian has a neat setup. Their distro covers ppc, i386 and AMD64 as well as others and they have provided packages to setup up thin client environments for any architecture running on a server of any architecture (boggling...). Search for LTSP in descriptions of packages for testing at . ltsp-client-builder is the key. You run it and it creates the LTSP environment on the server for whatever client you want. You have to set up your DHCP server to point the ppc client at the right environment and kernel, I suppose. I have not tried it.

So, you can run your LTSP server on AMD64 and serve clients of Pentium I's, ppc, i386, whatever. This is sweet for schools that have working inventory, but the new fanless thin clients and LCD monitors are the way to go sooner or later.

Anonymous visitor's picture
Submitted by Anonymous visitor (not verified) on

What? I thought Nvidia played best with Linux. Mine sure does. I CAN NOT go along with your Nvidia "ANYTHING" statement. I've had more trouble with ATI.

Kletskous's picture
Submitted by Kletskous on

Very nice article! I would like to make it available as a tutorial on our website. The easiest way for that is to have it available in html format. Woud that be possible?


Anonymous visitor's picture
Submitted by Anonymous visitor (not verified) on


Nice article, and i can see that it has been intentionally explained in such a way that newbies can follow it.
So my question is, if you went so far as to use ultra-simple language to explain to newbies, why don't you explain:
1)What is a NIC? and how to configure/use one?
2)What is the procedure on any one thin-client (entire setup process with screenshots would be ultra helpful).
3)And finally any problems/ special-case scenarios (most common ones), that would occur in a thin-client setup and how to deal with it.
I am having a Computer institute, and am planning to shift atleast one of my labs (30-PCs) to a thin-client based environment, using Edubuntu.
If you can help, with my above questions, please email me at kenthomson799(at)yahoo(dot)com. I would be highly obliged if i can setup a lab of 30PCs, running on a central server with the process you described.

The point is setting up stand-alone PCs, with Windows XP has been so familiar to me, that i cannot think of any other options, and your article certainly has helped me. If you can spare some time, please answer my above questions in detail.

Thank you,
and yeah, Nice Article!

Anonymous visitor's picture

"1)What is a NIC? and how to configure/use one?
2)What is the procedure on any one thin-client (entire setup process with screenshots would be ultra helpful).
3)And finally any problems/ special-case scenarios (most common ones), that would occur in a thin-client setup and how to deal with it."

NIC is Network Interface Controller. It is best to have two or more for the LTSP setup. If you have two, one will be the "primary" connecting to the ISP, and one will be for the LAN. The EdUbuntu setup should do this automatically after you declare one to be the primary.

On the thin client you can
1)Set the BIOS to boot PXE
2)Set the BIOS to display a menu in which PXE is one choice
3)Set up a floppy/CD/hard drive/flash boot loader from

It can happen that the driver for the video/NIC on the thin client is not working. In /opt/ltsp/.../etc/lts.conf on the server you can edit in a choice for driver. vesa usually works but may not have the best resolution. Most thin clients have fairly common NICs so I have not seen a problem, but you can often install a driver in the chroot of the client or compile a kernel with a driver if it is open source. That is a lot of work unless you have a ton of clients with this problem.

Anonymous visitor's picture
Submitted by Anonymous visitor (not verified) on

Somebody knows where to buy those thin clients, which I put on the back of LCD??
I found but it costs 395 USD!
It's really a lot!

Anybody knows alternatives?

Anonymous visitor's picture
Submitted by Anonymous visitor (not verified) on

Try - I have not got one but they seem to be good.

technosaurus's picture
Submitted by technosaurus (not verified) on

they have every kind of thin client you could want including a $150 tablet version as well as the $120 norhtec client for $99 (as low as $75 in bulk orders) 200 Mhz @128Mb RAM, plus fanless via systems and p4 ... awesome prices but shipping is from overseas, so bulk orders are a better deal.

Anonymous visitor's picture
Submitted by Anonymous visitor (not verified) on

hi friend please send me please send me how to config the client server in lab.
i am 6 th ec student,and u give me your ideas on [email protected]
please reply fastly,because i must need.ok
thanxs in advance.

gvy's picture
Submitted by gvy on

...and you don't substitute thousand thanks for thousand dollars for that kind of consulting. if you "must need fastly" then be prepared to either search/read/learn "fastly", or pay upfront.

free software isn't about all-free consulting, as free time is sparse.

PS: of course this comment is only for similar fastly students :) providing them with what they urgently request might just defile them into consumers, not creators.

PPS: just in case, we run LTSP virtualized in OpenVZ containers (described on wiki CaseStudies and on wiki in Russian+details).

Michael Shigorin

Anonymous visitor's picture
Submitted by Anonymous visitor (not verified) on

Can't get to the
Anyone knows other places to buy?


Anonymous visitor's picture
Submitted by Anonymous visitor (not verified) on


Luka Manser's picture

is this possible in Kubuntu also? My friend installed it on his laptop. Any kind of help is great. If anyone has nay kind of pdf or manual I wolud appreciate if you post a link. I googled but found nothing.
Luka Manser