Recently I had cause to buy a scanner. Being in a reasonably small home I was eager to save on desk-space, and so decided to upgrade my ageing inkjet printer at the same time. Having looked around I eventually went for an HP Photosmart C5180 device. This is my experience of installing it on Debian Lenny.
The C5180 is a scanner/ink jet printer with six-ink photo quality printout and the ability to print direct from various types of media card. It comes with a USB 2.0 and Ethernet RJ-45 socket as well. Either would have suited me and, in fact, I will eventually stick it on my home network. Tonight though I was not really in a position to do that, so I went for the USB install instead. In case you are wondering I went with this device for two reasons:
- I knew HP provided free software drivers for their devices.
- It was on special offer at the time and I saved around 30% of the regular price.
The HP drivers do not come on a CD-Rom, unlike for Mac and Windows. This is not my gripe--as you will see installing this printer did not require a CD because the drivers were as a Debian package. My gripe is that the packaging mentions both Windows and Mac support (although noting that not all features are available under Vista) but does not mention GNU/Linux at all. Come on HP: you've outshone a lot of manufacturers by releasing free drivers; so, how about giving all those newbie Ubuntu users a fighting chance and putting a penguin somewhere on the box? The install documentation is also devoid of a mention of GNU/Linux: again, for anew user it would have been nice to see something in there.
As said HP provided free software drivers and these were available as Debian packages. A quick check of the excellent LinuxPrinting.org database revealed the the HPLIP/HPIJS drivers were what I needed. So
apt-cache search hplip revealed the packages and
apt-get install hplip installed them. I already have cups installed on this machine and HPLIP integrates with it seamlessly.
The installation restarted cups for me so I just needed to connect the USB port of the printer to my PC and add the printer to cups. I prefer to use the web interface for CUPS; so, pointing my browser at
http://locahost:631 brought this up. I then clicked the
Add printer button and followed the steps. When it came to which model/driver to use, I chose "HP PhotoSmart C5100 Foomatic/hpijs, hpijs 220.127.116.11 - HPLIP 2.8.2" from the list: cups had this already recommended and selected, so it wasn't hard to find. Printing a test page after the installation proved all was well.
Scanning was a little more tricky. Most Linux scanning needs are met by SANE (Scanner Access Now Easy) so I installed that and the xsane frontend for it. Here I hit my first problem: SANE does not come with the relevant backend for the HP C5100 series. All was not lost though as a quick bit of Googling revealed I needed to add
hpaio as a single line in the
/etc/sane.d/dll.conf file. Once that was duly done, I fired up xsane to be told no devices were available. Running
scanimage -L from a terminal revealed the device was there and being detected. Running
hp-check (supplied with the hplip package) revealed the scanner was being detected. So why was xsane not finding it. I decided to manually pass the device URI to xsane.
scanimage -L gives you the device URI so all I needed to run was
xsane hpaio:/usb/Photosmart_C5100_series?serial=MY79IQ213604MK. Don't worry about the the length of the parameter, normally you don't need to enter that in at all.
Xsane reported a permissions error trying to read the device. A-ha! A solution was in sight. At this moment I slapped my hand on my forehead a few times as I remembered that both
scanimage -l and
hp-check were run with root permissions (sudo). USB devices are stored under
/dev/bus/usb/ and so I ran
ls -lR /dev/bus/usb and found the C5180 in there with an owner of
lp and a group of
scanner. So I added my user to the scanner group with
groupadd -a -G scanner ryan. The new group would not be present until I logged in again but as it happened I had to shut down the machine shortly afterwards anyway. If you want to refresh the current users' groups without ending the session have a look at the
newgrp commnand. Upon logging in again I started xsane and it found the scanner and everything worked as expected.
A lot of people say the learning curve for GNU/Linux is too difficult. My experience here showed that, as far as scanner go, it could be made easier. But it was by no means a task beyond a bit of Googling and one of my reasons for writing this was to collate the information I gathered into one place. HP's drivers work like a charm and the printer itself is marvelous, I recommend it. My next task will be to setup scanning over the network/. I've seen a few useful HOWTOS on that, so I'll let you know how I get on.