GRUB tips and tricks

GRUB tips and tricks

The GRand Unified Boot loader, or GRUB, has all but replaced the default boot loader on many GNU/Linux distributions. It includes some conveniences over LILO, the LInux LOader. One advantage is not having to remember to run /sbin/lilo every time you make a configuration change. It also can function as a boot loader for removable media such as floppies, CD-R/W and USB flash memory keys. It is short-sighted to view GRUB only as a boot loader to be installed on a hard drive of a GNU/Linux system. Combined with a few other utilities, GRUB can be a powerful and good-looking tool for your home, organization or workplace.


First, what exactly is GRUB? GRUB is a boot loader, which means it passes control of the boot process from the Power-On Self Test (POST) to the kernel of your GNU/Linux distribution. GRUB works in a modular, layered fashion so that any unneeded modules are not loaded. Not only does this reduce execution time, but it saves valuable resources when running from removable media. GRUB optionally loads its configuration file at run/boot time, so you don’t have to type in commands manually each time. However, the command-line option is still available in case there is an error in your configuration file. So why use GRUB when there are other options out there? The beauty of free software is that you have choices. Alternatives to GRUB include LILO, syslinux and isolinux. The benefit of GRUB is that it will work in many different types of boot devices, but you only need to learn one set of menu commands. In addition, GRUB can work on other forms of bootable storage, such as CD-R/W, USB flash memory keys, floppy disks, and even via a TFTP server with PXE ROM booting.

Installing GRUB on a USB flash memory key

Figure 1: you can run GRUB on a USB flash memory key!Figure 1: you can run GRUB on a USB flash memory key!

I got the inspiration for this article after trying DSLinux (or DSL), which is a fully graphical Linux distribution weighing in around 50 MB. After seeing an advertisement on their website for a USB flash memory drive with DSL installed, I figured I could probably learn how to set DSL up myself on my Lexar 256 MB JumpDrive. The DSL documentation pointed towards installing via syslinux and reconfiguring the cylinder/head/sector information of my JumpDrive, but I didn’t have any luck trying to get my USB flash memory key to boot successfully. Finally, I tried using GRUB and I was up and running with DSL in no time!

First, I recommend creating a directory structure to organize your boot-related files, and keep them separate from any other files you’d like to keep on the USB flash memory key. You could create two partitions, but I couldn’t get both partitions to load correctly when I inserted the key back into Windows. On my USB flash memory key, I created a root folder named boot to hold all the data necessary for USB booting (see figure 2). Under the boot folder, I created a directory named grub for GRUB-related files, images which are initial ramdisk (initrd), floppy, or disk images, and finally kernels to hold all the kernels. You may want to organize your boot folder differently, but make sure that you change the corresponding paths and directory names in GRUB’s menu.lst file. The menu.lst file that I use can be found in Sidebar 1.

Figure 2: this is the file structure on my USB Memory KeyFigure 2: this is the file structure on my USB Memory Key

Sidebar 1: Contents of menu.lst





title DSL 1.2 (2.4.26) 1024x768 (save to RAM)

kernel /boot/kernels/dsl-linux24 ramdisk_size=100000 init=/etc/init lang=us apm=power-off vga=791 toram nomce noapic quiet knoppix_dir=images knoppix_name=dsl


title Debian Sarge Installer

kernel /boot/kernels/di-vmlinuz initrd=/boot/images/di-initrd.gz ramdisk_size=10240 root=/dev/rd/0 devfs=mount,dall rw

initrd /boot/images/di-initrd.gz

title HP nx5000 F0.d BIOS Upgrade

kernel /boot/kernels/memdisk

initrd /boot/images/hpnx5000f0d.img

title Memtest86+ (1.60)

kernel /boot/kernels/memdisk

initrd /boot/images/memtestp.bin

Next, you’ll need to copy some of GRUB’s stage files, including stage1, stage2, and fat_stage1_5, and put them into the boot/grub directory on the USB flash memory key. These will allow GRUB to boot into GNU/Linux and other operating systems. After the files are copied over, it’s time to install GRUB to the Master Boot Record (MBR) of the USB flash memory key.

Luckily, it’s the same process as installing to a hard drive:

# grub
grub> find /boot/grub/stage1

On my system, hd0 is /dev/hda and hd2 happens to be /dev/sda. Just to make sure, we can use a bash-like tab completion to look through a filesystem:

grub> find (hd2,0)/boot/im<TAB>
grub> find (hd2,0)/boot/images/

Since the /boot directory on /dev/hda doesn’t have an images directory, I know that (hd2) is the hard drive that I want to install GRUB on:

grub> root (hd2,0)
 Filesystem is type fat, partition type 0xb
grub> setup (hd2)
 Checking if "/boot/grub/stage1" exists... yes
 Checking if "/boot/grub/stage2" exists... yes
 Checking if "/boot/grub/fat_stage1_5" exists... yes
 Running "embed /boot/grub/fat_stage1_5 (hd2)"...  15 sectors are embedded.
 Running "install /boot/grub/stage1 (hd2) (hd2)1+15 p (hd2,0)/boot/grub/stage2
/boot/grub/menu.lst"... succeeded
grub> quit

Great! Now we have GRUB in the USB flash memory key’s MBR. Now, we have to put some files on the memory key to boot into and create a menu.lst file!

GRUB with disk images

One cool trick is to use GRUB and memdisk to boot floppy disk images. Using the memdisk kernel from the syslinux package, you can load disk images and execute them in a non-emulated environment. How might this be useful? Let’s say you have an organization with several different models of desktops and laptops. You could create a CD-R/W or a bootable USB flash memory key with all of the different BIOS upgrades or hardware tests. Rather than carry around a book of floppies, you can simply copy the floppy image and boot from the CD-R/W or USB flash memory key. Using this method, you can also add Memtest86+’s floppy image to your bootable CD-R/W or USB flash memory key and have it at your disposal. Here is an example of a menu.lst snippit using memdisk to boot into Memtest86+:

title MemTest86+ Ver 1.60
    kernel /boot/kernels/memdisk
    initrd /boot/images/memtestp.bin

There is nothing special about the filenames. The only important thing is that the path and name referenced matches with the actual files. Check out Sidebar 1 for more examples of disk images.

GRUB with DSLinux

Figure 3: DSLinux is a 50 MB fully-graphical live GNU/Linux distributionFigure 3: DSLinux is a 50 MB fully-graphical live GNU/Linux distribution

So how can you boot a full GNU/Linux desktop off a USB flash memory key with GRUB? First, download the DSL ISO9660 image, and either burn it to a CD, or mount it via loopback:

# mkdir dsl-test
# mount -t iso9660 -o loop dsl-image.iso dsl-test

Next, copy the KNOPPIX file, kernel, and initial ramdisk:

# cp dsl-test/KNOPPIX/KNOPPIX /media/usb/boot/images/dsl
# cp dsl-test/boot/isolinux/linux24 /media/usb/boot/kernels/dsl-linux24
# cp dsl-test/boot/isolinux/minirt24.gz /media/usb/boot/images/dsl-minirt24.gz
# sync
# umount dsl-test && rmdir dsl-test

This assumes that your USB flash memory key is mounted at /media/usb. Next, edit the /media/usb/boot/grub/menu.lst file and make sure it looks like the entry in Sidebar 1. You might have noticed that the root line at the top of the menu.lst file says (hd0,0) even though we used (hd2,0) earlier. When you boot from the USB flash memory key, the key itself becomes hd0, even before the primary master hard drive. Once you have the menu.lst file edited, go ahead and reboot. Make sure that your BIOS is set to USB-HDD, USB-ZIP, or USB-FLOPPY. You might need to experiment to see which one works. Once you get to the menu, select the option for DSL. If you get a GRUB error and are unable to successfully boot into a kernel, press the ‘c’ key to open a GRUB prompt. You can try commands like find to help locate files to boot from.

GRUB splash images

Another cool function with GRUB is putting a splash image on the boot menu screen. By default, GRUB will make the menu screen a plain black-and-white menu. There are menu options to change the black and white colors, but why stop there? Grab your favorite picture, or head to one of the URLs listed below which have splash images created for you. If you are creating your own, it will need to be in XPM format, a maximum color palate of 14 colors, and 640x480 resolution size. The GIMP can help transform your graphic to these specifications. As an alternative, you can use the ImageMagick suite of programs. The application convert can help with this conversion process. You can run it as follows:

$ convert -resize 640x480 -colors 14 mycoolpicture.jpg mybootsplash.xpm
$ gzip mybootsplash.xpm

In this case, the file mycoolpicture.jpg will be resized to 640x480, reduced to 14 colors, and saved in the XPM graphical format. The second step compresses the XPM file using the gzip compression method. GRUB can display the gzipped-xpm splash images well.

If you don’t want to create your own splash image, check out some of the following web sites which have them available for download:

  • GNU GRUB Public Splashimage Archive
  • GRUB Splash
  • Once you have the XPM or gzipped-xpm file, you need to add a line at the top of GRUB’s menu.lst to instruct GRUB to load the specified boot splash image. The line should read as follows:

In my case, I’m using the Debian boot splash image as my background.

GRUB on CD-R/W media

I’ve also mentioned several times about installing GRUB to use for a bootable CD-R/W disk. When generating the ISO image, you will use some special settings of mkisofs. The command to build a bootable GRUB CD-R/W looks like:

$ mkdir -p iso/boot/grub
$ cp stage2_eltorito iso/boot/grub
$ mkisofs -R -b boot/grub/stage2_eltorito -no-emul-boot \
    -boot-load-size 4 -boot-info-table -o grub.iso iso

The key is to copy the stage2_eltorito file into the /boot/grub directory of the CD image tree, and run mkisofs with the options specified above. As mentioned earlier, you can also burn a menu.lst file along with kernels and disk images and put them all on the CD. In the menu.lst, you will need to use (cd) as the device, rather than (hd0). Splash images work well, too.


Congratulations! Now you have a bootable USB flash memory key, with DSL and memtest86+, and even a nice boot splash image. You even have the knowledge to add extra images, like your favorite BIOS update disk image, and others. For more information, check out some of the links in the resources section below.




admin's picture
Submitted by admin on

From: pierre laplante (SUBSCRIBER!)
Date: 2006-01-29
Subject: files

Do you have a places where we can find all the files. So it would be easier to test.


From: Matt
Date: 2006-01-30
Subject: Typo

4th sentance, 1st paragraph. "short-sided" => "short-sighted"

From: Dave Guard (SUBSCRIBER!)
Date: 2006-01-31
Subject: Typo - fixed.

Thanks for spotting that. Somehow, everyone in the editing process missed it. It must be because it doesn't look like a typo.

Thanks again and thanks for reading.

From: Stuart Guthrie
Date: 2006-02-09
Subject: Can you boot from a disk.iso?

Is there a way to boot from a disk version of an iso? ie to cut-out the step where you burn a CD. This would be most handy..

Jeremy Turner's picture

Hi Stuart,

No, I was not able to find a way to boot directly from an iso image. But it was also not the intended goal. Since grub works independently of the kernel and disk image, I can copy the compressed-cloop file (usually KNOPPIX or such), along with the kernel and minirt file, save it to my flash drive, and it would work great. Some distributions, like DamnSmallLinux rarely ever change kernels (DSL 2.3 still uses 2.4.26), I don't even need to copy over those files.

Although not much, copying the entire iso would take up a little more space. Not only are there extra files on the iso image, but there's the properties of the iso image files (Joliet and RockRidge extension information) that would all need to be saved on my flash drive. This is probably not much, but I'm working with a 256 MB drive.

So the short answer is no. But let me know if you come across a way to do it!

Anonymous visitor's picture
Submitted by Anonymous visitor (not verified) on

The short answer is yes :). I just spent the past two days to find out how.

use grub for dos ( - it's in chinese though)

If you just want to do something like in linux live cd, i.e., the iso file is used to host the systems files, it's easy and straightforward to use iso.

If you want to boot from a iso file on a harddisk, do something in menu.lst like

title Boot from iso on a harddisk
map (hdX,Y)/your.iso (hdZ)
map --rehook
chainloader (hdZ)+1
rootnoverify (hdZ)

The iso file must be in one chunk - contig from sysinternal may come handy. It's a good idea to use fat32 to host the iso file.

Also check out

Anonymous visitor's picture
Submitted by Anonymous visitor (not verified) on

I'm not sure if grub4dos will work with linux iso images. As it is said in the URL you posted, the work of grub4dos in this item may be followed in the same way it is at ISOEMU (by Gandalf).

I've taked a look at:

I've donloaded ISOEMU
... and even when I read the following at the README, I tried. Not too hard because of this:

Known Limitation


* Support FAT32/NTFS partition only;

* Works on x86's RealMode only(so this app cannot be used to boot Windows PE,

OR, WinNT based OS), `cause it hooks INT13h;

* Support 8.3 file format only;

so.... will it work with linux? I think not at the moment.

Anonymous visitor's picture
Submitted by Anonymous visitor (not verified) on

I'm searching for a way to boot from iso images...

I found the avlgo to boot iso, but this don't work very well, don't support linux live cd and the compression type is incompatible for linux boot cds testeds...

Anonymous visitor's picture
Submitted by Anonymous visitor (not verified) on

Works perfectly and so easy & simple. Thank you.

Anonymous visitor's picture
Submitted by Anonymous visitor (not verified) on

Boot simply freezes on my machine juste before grub is loaded (or just when it loads ?). BIOS says it has found the USB mbr and will boot on it, then nothing. I must switch off my computer.
Have searched for reasons but found nothing. If someone has hints...

Anonymous visitor's picture
Submitted by Anonymous visitor (not verified) on

When installing grub you were able to find your boot device by:
# grub
grub> find /boot/grub/stage1

Mine only shows shows my main hard disk. I am using Fedora Core 5 I have been trying to install Grub directly to the devices but it gives me a wierd error about my BIOS. My drive is a 2G noname brand. Any tips?

Anonymous visitor's picture
Submitted by Anonymous visitor (not verified) on

Be sure to run the grub command as root.

On Ubuntu if I run as user it will only list hd0,0 but if I do 'sudo grub' it finds all disks.

Anonymous visitor's picture
Submitted by Anonymous visitor (not verified) on

First, the latest version of grub I've got on FC6 actually looks for grub.conf NOT menu.lst. So you might have to rename that file.

Second, the error mentioned above is huge...the path for knoppix_dir is absolute, not relative, so it has to be /boot/images as mentioned.

Third, for the last poster on the Grub install...I've noticed that sometimes grub doesn't find the drive. I think if you do a bad search it can get confused. Quit and restart doing the commands in order. I also think that tabbing can confuse it. Took me a few tries but it worked.

Anyway, thanks for the article, it really helped!

Anonymous visitor's picture
Submitted by Anonymous visitor (not verified) on

I can load GRUB, but when i choose DSL, it starts loading, then it says "cheking for USB devices" and freezes. I am using a centrino Toshiba laptop with 4 USB ports. Can anyone give some hints? Thanks.

Anonymous visitor's picture
Submitted by Anonymous visitor (not verified) on

How could the resulting USB stick work on any computer, if the disk location is hard-coded into menu.lst?

Ixian's picture
Submitted by Ixian (not verified) on

It isnt hardcoded into menu.lst.
it uses hd0,0 which is what the USB stick becomes when you boot from it.

Anonymous visitor's picture
Submitted by Anonymous visitor (not verified) on

hello there i'm trying to boot *.iso files from my bootdirectory

however its not accepted when edit

chainloader (hd0,1)/knoppix.iso

into grub.conf, it says it doest know the file system, but iso966- is in /grub.

it says version 0.97, is this too old ?this came with my gentoo install cd

can anyone give us their grub.conf with some working isos in it ?


amsterdamharu's picture

Are you sure after running the setup it works? All I get when booting is "could not find kernel image linux". Grub is not even starting at all because I cannot use any of the grub commands.

Found many sites that say you have to format the drive and use grub-install. Trying that on a fedora 9 machine does not seem to work either: (fedora mounted the usb as TRIP and hd1 is the what I get when using find in grub (hd1,0)
# grub-install --root-directory=/media/TRIP hd1
/dev/sdb1 does not have any corresponding BIOS drive

Hope anyone can help me out here.

amsterdamharu's picture

I am using fedora 9 and all I get when rebooting is:
"Could not find kernel image: linux"
Grub has not started I think because I cannot use any of the grub commands, the only thing is typing a location for the kernel image and even that won't help

Could it be that the usb is not hd0,0? There is one hd in my computer and one cd so tried hd1,0 and hd2,0 but no luck.

dankexie's picture
Submitted by dankexie on

Known Limitation


* Support FAT32/NTFS partition only;

* Works on x86's RealMode only(so this app cannot be used to boot Windows PE,

OR, WinNT based OS), `cause it hooks INT13h;

* Support 8.3 file format only;


In GRUB 0.97, you can use any file system it supports (FAT, ext2/3, etc). If GRUB doesn't boot up because BIOS doesn't recognize the USB drive correctly, there is a script to fix GRUB to run on these legacy BIOS:

fred3's picture
Submitted by fred3 on

What might the instructions be now for GRUB2?

Author information

Jeremy Turner's picture


Jeremy Turner enjoys freelance writing when given the opportunity. He often plays system administrator, hardware technician, programmer, web designer, and all-around nice guy. You contact him by visiting his web site.